Industrial Packages Machine

The automatic Industrial Packaging pulp molding production line is composed of a pulping system, forming system, drying system, vacuum system, high pressure water system and air compressor system. It is used to produce electronic product packaging, small home appliance packaging, industrial parts shockproof inner packaging, paper care, and paper lining products. Using waste paper such as waste newspapers, waste carton paper, office paper, scraps, etc. as raw materials, it is formulated into a slurry with a certain concentration through hydraulic disintegration, filtration, water injection and other processes. Wet blank products are formed through vacuum on the metal mold. The billet is dried by the drying line and then completed.

The host system consists of a forming machine and a single-layer high-efficiency drying line. Flexible production; can produce a variety of products; high efficiency and energy saving.


Model: IP3000 / IP4000 / IP6000 / IP8000

Production line composition: Forming System:Forming System: reciprocating forming (with the function of washing mold / product burrs, equipped with preheating system) . Drying System:single layer high efficient drying line. Hot press system: Manual hot press

Forming platen size: 1200x800 / 1600x800

Design capacity of production line(based on 30cell egg tray): It is determined by the product produced (involving product layout / product weight)

Forming type: aspiration et formation de la pate alternative

Product height: ≤200mm

Heating fuels: Gas, Thermal oil, LPG, LNP or steam(if with steam, the drying system is to be lengthened basing on the specific output capacity)

Control mode: control mode, PLC + touch screen

Note: the above parameters are for reference only. Due to the continuous development of technology, the relevant data will be updated continuously.



ModelsOutput CapacityFloorStaffElectricityWater


50*12 Height≥4M4-7 persons/shift100-150KW/Heure0.5-1M3/Heure
IP50005Tons/day60*12 Height≥4M5-7 persons/shift150-190 KW/Hour0.6-1.5CBM//Hour
IP60006 Tons/day65*12 Height≥4.5M6-8 persons/shift160-210KW/Hour0.75-1.5CBM/Hour

High efficient and energy saving 
6 layer high-efficiency drying line, saving natural gas.
High degree of automation 
4-5 operators are needed only.
Production flexible
Can flexibly produce electronic product packaging, small home appliance packaging, industrial parts shockproof inner packaging, paper Care, paper lining,etc.
Easy Operation and Maintenance
The operation is simple, and ordinary operators can perform maintenance. 


In 1997, BST team imported the European production line to China and started the business of molded pulp products production. During the past 24 years, BST team dedicate themselves to the development of pulp molding industry and continue to extend to the downstream industry.  BST has now become the group corporation of R & D, manufacture and sales of the whole pulp molding production line, mold and moleded pulp products. It' s also a China-Europe cooperative international company with foreign factories around the world and the first listed pulp molding equipment manufacturer in China.

A China-Europe cooperative company and international group. 

The 1st listed company of Chinese pulp molding machine manufacturers and high-echnology company. 

Focusing on pulp molding equipment for over 24 years, the leader for world high-end pulp molding equipment. 

Serving more than 400 customers all over the world with 6 local service centers.


 BeSure headquarter is located in Foshan GuangDong which is the equipment manufacturing center in China, focusing on  R&D, manufacturing and sales of various kinds of pulp molding equipment and molds.The factory covers an area of 38000 square meters and has more than 250 employees. 

BeSure technical staff accounts for more than 50% of the total number of company. The current staff number for equipment R & D , engineering installation and commissioning, electrical engineering process , technical support, mold design and making, production , quality control , sales is 131 in total, including 8 doctors, 19 masters, covering multiple disciplines such as mechanical, electronic, thermal engineering, fluid mechanics, paper making, product design, engineering design etc... 

The equipment workshop is divided into several parts,including cutting, welding, assembling, painting, processing, electrical assembling and so on . There are different kinds of processing equipment such as CNC machine, milling machine, drilling machine, lathe, shearing machine, bending machine, wire cutting machine, etc.

Mold manufacturing workshop includes CNC processing, drilling, mesh covering, polishing, assembly and other processes. The workshop is equipped with tableware and fine packages machine for products R & D, testing and improving. At the same time it's also used for customers visit and technician training.

There is a sample workshop for mold tesing, sampling and small quantity products production. There is an entire equipment testing system including pulping system, vacuum system, high pressure water system, compressed air system for ex factory equipment commissioning to ensure that all the equipment is qualified before shipping. In order to improve the equipment intelligence, BST set up an R&D center in Europe where the world pulp molding industry originated. There are 6 employees currently and the center is focusing on the development of automatic equipment and production line, helping on BeSure technology innovation. At present, BST has several technologies which are the first innovation in China and has several national patents, leading the world pulp molding industry development. In July 2016, BeSure and Siemens achieved the strong alliances to facilitate pulp molding production line towards intelligence.

  • How do you guarantee the quality of your company's equipment?
    The core components of our equipment are all international well-known brands, and the control system is Siemens brand in Germany.
  • What guarantee does your company have for after-sales service?
    Our company has six service centers around the world to provide timely and fast after-sales service for local customers.
  • What are the raw materials used in the equipment?
    Raw materials are divided into two categories: one is secondary recycled waste paper and the other is fiber pulp board.
  • How long can your equipment be delivered?
    The manufacturing time of the equipment is 4-5 months.
  • What countries does your company export to?
    Our equipment is sold to more than 60 countries all over the world, such as the United States, Canada, France, the United Kingdom, Russia, Malaysia, India, Saudi Arabia, Mexico, South Africa and so on.
Basic Information
  • Year Established
  • Business Type
  • Country / Region
  • Main Industry
  • Main Products
  • Enterprise Legal Person
  • Total Employees
  • Annual Output Value
  • Export Market
  • Cooperated Customers
Contact Us
Take advantage of our unrivaled knowledge and experience, we offer you the best customization service.
  • phones:
    +86 18823159072
  • phones:
    +86 18823159370

Feel free to contact us

The first thing we do is meeting with our clients and talk through their goals on a future project.
During this meeting, feel free to communicate your ideas and ask lots of questions.

They are all manufactured according to the strictest international standards. Our products have received favor from both domestic and foreign markets.
They are now widely exporting to 200 countries.
Choose a different language
English English Română Română italiano italiano 日本語 日本語 Türkçe Türkçe bahasa Indonesia bahasa Indonesia العربية العربية Deutsch Deutsch 簡體中文 簡體中文 français français русский русский Português Português Español Español Ελληνικά Ελληνικά हिन्दी हिन्दी
Current language:English